Because of the double-start thread, the tape splitting works similar as a twist drill it gets apart the gnarled parts as well!


The cone is shell-hardened. It's an inductive surface hardening which allows keeping the core toughness and makes it much more resistant against weary stress so you don't have to be apprehensive of any tip brake off.
(The cone won't become rigid in its entire cross-section!)


This technology is a well proven method in gear manufacturing.
NEW!! Our double-start thread cones make the tip's way even easier into the wood. It's advantage that the tip snaps easier into the material so it's no need to sharpen the head of the cone. It's less likely - as it is with the over-sharpened pencils - that the tip brakes off due to a higher pressure.
Choose the quality!
We guarantee all the cones we sell!
If you would break the tip off at tree splitting, we exchange it for free!

 

Double-start thread splitter screw been manufactured in four different sizes








Can be used both for meters of wood and logs.

- CNC made perfect thread!
- Splitting cone Ø 4.33x10.23 inch - Ø 110mm overall length 260mm
- Available without neck section (shown in 2nd and 3rd picture)
- Double-start thread length 7.87inch - 200mm
- Variable thread pitch
- Pitch 0.31inch - 8mm
- Material: CrMo4
- Shell-hardened replaceable tip
- Left and right-hand thread design
- Connection diameter 40mm bore 70mm deep
- 2 piece adapter hole (M12 hex bolt)
For thinner meters of wood and logs.

- CNC made perfect thread!
- Splitting cone Ø 3.14x10.23 inch - Ø 80mm overall length 260mm
- Double-start thread length 6.69inch - 170mm
- Variable thread pitch
- Pitch 0.31inch - 8mm
- Material: CrMo4
- Shell-hardened replaceable tip
- Left and right-hand thread design
- Connection diameter 40mm bore 70mm deep
- 2 piece adapter hole (M12 hex bolt)
For wood logs.

- CNC made perfect thread!
- Splitting cone Ø 2.36x10.62 inch Ø 60mm overall length 270mm
- Double-start thread length 5.90inch - 150mm
- Variable thread pitch
- Pitch 0.23inch - 6mm
- Material: CrMo4
- Shell-hardened replaceable tip
- 2 piece adapter hole (M12 hex bolt)
 









7.87inch - 200mm log splitter screw hydraulic machines

- CNC made perfect thread!
- Splitting cone Ø 7.87x18.11 inch - Ø200mm overall length 460mm
- Double-start thread length 13.38 inch -340mm
- Pitch 0,47inch - 12mm
- Material: replaceable tip CrMo4 and C45
- Shell-hardened replaceable tip
- Left or right thread
- Connect round or square
- 6 piece M16 bolt or 8 piece M14 bolt
- Weight: 45-50kg, 100-110 lb



Make a great investment! Our splitting cones allow you to save time, energy and money.